How do you plan an auditorium?

How do you plan an auditorium?

Auditorium Dimensions & Layout Dimensions can get tricky, but a good rule of thumb is arranging the size of the auditorium around the type of performance and the number of audience members you plan to seat: 200 seats: 270m² | 2,900 ft2. 150 seats: 190m² | 2,000 ft2. 75 seats: 125 m² | 1,350 ft2.

What are the areas of an auditorium?

Auditorium structure

  • Stalls, orchestra or arena: the lower flat area, usually below or at the same level as the stage.
  • Balconies or galleries: one or more raised seating platforms towards the rear of the auditorium.
  • Boxes: generally placed immediately to the front, side and above the level of the stage.

What are auditorium aisles?

Aisles. Aisles are required on both side of every row of seats that is more than 10 seats. There shall be no more than 42 seats between aisles. must be the full width of the aisle and the minimum aisle width is 1 metre.

How are auditorium seats calculated?

Counting Fixed Theater Seats Simply count the number of seats in a typical row, and multiply this figure by the total number of rows. For example, if there are 15 rows with 20 seats per row, there are 300 total seats (15 x 20 = 300).

How do you design the auditorium stage?

7 Basic Rules for Designing a Good Theater

  1. Design a functioning Auditorium according to the type of performance and the number of the audience.
  2. Keep the standard distance for a comfortable audience seating.
  3. The stage is important: choose wisely.
  4. Keep the scenery low for better visibility.

How is auditorium size calculated?

12) Size of auditorium This number is derived from a seat width x row spacing of at least 0.45m2 per seat, plus an additional minimum of 0.5m x 0.9m i.e. approximately 0.05m2 per seat.

What is auditorium room?

An auditorium is a room built where people come to hear and watch performances i.e. a theatre, lecture hall, conference centre, or religious building. Design plays a crucial role in the overall effectiveness of auditorium venues.

How is auditorium area calculated?

The size should be fixed in relation to the number of audience required to be seated. The floor area of the hall including, gangways (excluding the stage) should be calculated on the basis of 0.6 to 0.9 sq. m per person.

What is the size of an auditorium?

Auditorium

Description Tenant Occupiable Areas Qty. Space Req’d.
Main Auditorium
Seating (300 seats) 1 3,600
Stage 1 1,200
Support Spaces

How do you design an auditorium seat?

How many square feet is an auditorium?

Auditorium Meeting Space

Meeting / Lecture Room Names Room’s Square Footage Classroom Capacity
Auditorium C 1102 36pp
Auditorium A+B 3937 144pp
Auditorium B+C 3075 108pp
Auditorium A+B+C 5039 180pp

What is cone of vision in auditorium?

In a nutshell, the cone of vision is the area of sight – or the angle of sight. For example, if a person wanted to see the entire theatre stage, usually a cone of vision is 60 degrees is required, so a person would need to sit far enough back to achieve this degree of vision.

What is the design of the auditorium?

Here Ground floor has been designed as administrative block and First floor has been designed as Auditorium and its facilities like Stage, Dressing area, Sitting area, Set of washrooms, entrance lobby etc. Drawing Contains Architectural Design like all floor detailed layout plans, building elevation and sections.

What is auditorium DWG plan?

Auditorium dwg plan have been designed in 2 levels and involves , floor plans , section and elevation . The spaces are named in floor plans . This file is editable dwg project . The first floor plan involves totally 1800 seat and divides into two unequal parts .

How many people can sit in the auditorium?

The AUDITORIUM plan show below has a total capacity of 352 occupants. In this image, you observe the detailing of the auditorium floor plans and its seating arrangement. The illustrations also include a section and the front elevation of the auditorium.

What is LeadCom’s auditorium seating layout guide?

Auditorium seating layout guide – Leadcom Seating Allow us to walk you through the decisions you’ll need to make and the concepts you should understand with this auditorium seating layout guide before you plan your space, from ensuring that every audience member has the best view possible, onto comfort and safety.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top