How do I unlock my DVR hard drive?

How do I unlock my DVR hard drive?

How to Unlock/Connect a DVR on a Windows PC

  1. Remove the screw at the edge of an empty drive bay inside the computer, near its top edge, using the screwdriver.
  2. Pull the power plug and data cable plug out of the drive bay.
  3. Insert the drive tray back into the drive bay and reattach the screw.

Can a DVR hard drive be used in a computer?

At present, Seagate and WD DVR hard drives are the most popular ones. These DVR storage devices can be connected to a PC and let you watch the recorded videos easily. To use the hard drive on a PC, you need to unlock it and then format to a compatible file system in advance.

How do I connect an external hard drive to my DVR?


  1. Make sure the external hard drive is plugged in and turned on.
  2. Allow 15 to 30 seconds for the external hard drive to reach operating speed.
  3. Connect one end of the eSATA cable to the eSATA port on the back of the DVR.
  4. Connect the other end of the eSATA cable to the eSATA port on the external hard drive.

Can you connect an external hard drive to a directv DVR?

DIRECTV DVRs can use external drives, but there are some things you need to know. Not every hard drive will work — in fact most won’t — and you’ll lose access to the recordings you have on the internal drive. You need an eSATA hard drive. You need a hard drive with an eSATA connector on it.

What format is a DVR hard drive?

FAT32 is the most common file system to format a hard drive for DVR since it is universally accepted and simple to use.

How do I hook up an external hard drive to my dish receiver?

Connect the USB cable from the external hard drive to the receiver. If necessary, connect the external hard drive’s power to the wall. Select Yes on the Attention 428 pop-up. The Attention 499 pop-up will display instructing you to call DISH.

What kind of hard drive is in a DirecTV DVR?

Regular HDDVRs (only allowed with the regular Genie line) have a 500GB internal (since HR22). Support up to 2TB external. Genie (HR34, HR44, HR54) has a 1TB internal. Old listing suggested up to 4TB external, but others have used up to at least 12TB successfully.

What can I do with an old directv DVR?

If you have a DIRECTV DVR and it breaks, you should recycle it or return it to DIRECTV if they want it back. If you leave DIRECTV, you should return their equipment to them or recycle it. DIRECTV DVRs can’t be used for over-the-air reception. They can’t be used for other services.

What does no HDD mean on a DVR?

A Hard Drive is not detected error message indicates a hard disk drive (HDD) issue within your DVR / NVR system. To resolve the error, reseat your HDD to ensure the cable connections are secure. Prerequisite: The following instructions require you to access your system using your DVR / NVR and a monitor.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top