How do I transfer data from Accu-Chek to PC?

How do I transfer data from Accu-Chek to PC?

Enter our website www.accu-chekcac.com and download the Accu-Chek Smart Pix Software. Connect the Accu-Chek Instant meter to the computer using a USB cable. Set the time format and a BG (blood glucose) target range then click Save. Afterwards click OK on the confirmation message to complete the configuration.

How do I transfer data from my Accu-Chek phone?

Can I transfer data from the Accu-Chek 360° app to the Accu-Chek Connect app?

1. Email a copy of your data to your own email address.
2. Select Settings.
3. Select Data Sharing.
4. Select Backup.
5. Select email for backup.
6. Enter your email address.
7. Select Send.
8. Delete the Accu-Chek 360° diabetes management app from your device.

How do I transfer data from Accu-Chek Instant?

On your meter, tap My Data then Data Transfer and Wireless to transfer results. If you wish to have your blood glucose result automatically sync to mySugr App, on your meter, select Wireless then Auto-Send.

What does PC mean on Accu-Chek?

Micro USB Port Transfers data from the meter to a computer (PC). The Accu-Chek Instant S Meter.

How do you sync Accu-Chek?

Apple and Android

1. Turn on your meter.
2. Go into Settings on the meter.
3. Select Wireless, then Pairing, then Pair Device and follow the on-screen instructions to create a new wireless connection.
4. Watch for a pairing notification on your smartphone – via popup message or the notification center.

How do I upload a meter to glooko?

If your meter is not listed:

1. Tap New Device (iOS) or Add Device (Android).
2. Tap to place a checkmark (
3. Tap to place a checkmark (
4. Next, tap Connect to complete the setup process for each new device.
5. Follow the on-screen prompts to connect the device to Glooko.
6. Your device will now be listed on the Sync menu.

How do you set up a glooko transmitter?

SETUP OF THE GLOOKO TRANSMITTER Place the USB hub inside the Cable box. Connect the USB hub to the Glooko Transmitter (using the USB cable) and plug its power supply into a power outlet. Then place the Glooko Transmitter on top of the Cable box. Connect its power supply, as shown above, and plug it into a power outlet.

What does e3 mean on Accu-Chek?

“E-3” in the display means your blood glucose may be extremely high or a meter or a test strip error has occurred. The following instructions should help you understand what action to take: If your test result matches how you feel, contact your healthcare professional immediately.

What type of battery does the Accu-Chek nano use?

Watch how to replace the batteries in the Accu-Chek Nano blood glucose monitor. The meter uses 2 3-volt lithium coin cell batteries, available at most retailers. If playback doesn’t begin shortly, try restarting your device.

How do I download results from the Accu-Chek meter?

FAQ Answer: You can transfer stored results to a computer simply by pointing the infrared (IR) window on top of the meter toward the IR window of the Accu-Chek download cable. The 2 windows should be 3 to 10 cm (1 to 4 inches) apart. To enter download mode: Turn off the meter.

How do I transfer data from Accu-Chek Aviva to my computer?

Select My Data, Data Transfer, then select USB cable Plug USB cable into device and computer; do not move device or cable during communication 2. Accu-Chek Aviva Expert meter From the main menu, select My Data, then select Data Transfer Place device on a flat surface with IR port within 4″ from the infrared cable 3.

How do I enable the “auto-send” function on my Accu-Chek meter?

Tip: On the Accu-Chek Aviva/Performa connect meter you can enable the “Auto-Send” function to automatically send your blood glucose value to mySugr Logbook after each measurement (if Bluetooth is activated on your smartphone). Auto-Send is found under “Settings” and “Wireless”.