How do I restore my HP LaserJet P1102w to factory settings?

How do I restore my HP LaserJet P1102w to factory settings?

Factory Restore Procedure: Turn the printer off:- Press and hold down the wireless button and the cancel button (x button) while turning the printer back on and don’t release the two buttons until the printer stops making noise. Print out a configuration report and make sure the SSID and IP address are cleared.

How do I setup my HP LaserJet P1102w wireless?

Here are the steps:

1. Unplug the USB cable from the printer and computer if present.
2. Go to Control panel – Programs and feature – Select all the HP LaserJet printer entries and uninstall them.
3. Restart your computer.
4. When prompted, select the Connect through a wireless network option.

How do I fix my HP LaserJet P1102w?

FIX: HP LaserJet p1102w not printing via USB

1. Check Device Manager warning.
2. Perform a clean install.
3. Reset the printing system.
4. Troubleshoot the USB cable and connection.
5. Set the USB connection as default printer.
6. Use HP Print and Scan Doctor.
7. Disable Startup services, and reinstall HP software.

How do I get my HP LaserJet P1102w online?

Go to Software and Driver Downloads, type your printer name, and then press Enter. Download the full feature software, and then follow the on-screen prompts to install and set up the printer on a wireless network. When prompted, restart your computer to finish the install.

How do I reset my HP printer to factory settings?

9.18.3. How to reset to factory settings on HP printers

1. Open the printer’s web page and Sign in as Administrator.
2. On the General tab select Reset Factory Settings in the menu.
3. In the section Reset Firmware select Reset.
4. Select Reset. The printer will now restart.
5. Set printer’s date and time correctly.

How do I print a configuration page on HP LaserJet P1102w?

Print a Self Test/Device Configuration page through the control panel (HP LaserJet Pro M12w, P1102w, and P1109w printers)

1. Press and hold the Cancel button until the Ready light blinks.
2. Release the Cancel button . The Self Test/Device Configuration page prints. Figure : Self Test/Device Configuration page.

How do I connect my LaserJet printer to my WiFi?

Use the Wi-Fi Protected Setup (WPS) button on your router to connect the printer to your Wi-Fi network.

1. Place the printer near the Wi-Fi router.
2. Put the printer in WPS connection mode.
3. Within two minutes, press and hold the WPS button on the router until the connection process begins.

Does HP LaserJet P1102w work with Windows 10?

HP LaserJet P1102w Printer Specification Supported OS: Windows XP, Vista, 7, 8, 8.1, Windows 10, Server 2000, 2003, 2008, 2012, 2016, 98 and Me, Mac OS.

Why does my HP printer not print PDF files?

Make sure your printer driver is up-to-date The latest printer driver enables your printer to work fine. An old, corrupted, or missing printer driver would make you cannot print PDF files. Download and install the driver on your computer. Restart your computer and try to print your PDF file in Adobe to see if it works.

How do I reset my HP printer?

1 Restore Defaults

1. From the screen on your printer, navigate to Setup.
2. Tap Tools.
3. Tap Restore Defaults.
4. Tap Yes.
5. The printer will restart.
6. Once restarted, your printer will have been reset to factory default settings.

How do I reset printer settings?

It’s a pretty simple process:

1. With the printer turned on, pull out the power cable from the back of the printer.
2. Unplug the power cable from the wall outlet.
3. Wait 15 seconds.
4. Plug the power cable into the back of the printer.
5. Plug the printer back into the wall outlet.
6. Turn the printer back on.
7. Run a test print.