How do I reset my Webasto Thermo Top C?

How do I reset my Webasto Thermo Top C?

Error Lockout Reset Thermo Top C with “Timer” After correction of the malfunction the error lockout is reset by switching the heater off and on again. In case of overheating an error lockout reset is achieved by removing fuse F1, 20A for at least 10 seconds.

How long does a Webasto heater last?

The Webasto heaters can run up to 22 hours on a single gallon of fuel. The Webasto Air Top 2000 is the premier choice when it comes to choosing an air heating system for your vehicle as the model has variations that are available for diesel or gasoline fuels.

Why is my Webasto heater not working?

Blockages in the fuel line and/or burner are also common causes. You can check for fuel delivery at the heater end during start up, and if no fuel is coming out of the pipe, your heater won’t start. Other causes could be an air blockage in the exhaust or combustion air pipe. Check for blockages in exhaust pipe.

How do I run a Webasto diagnostic?

Hardware connection procedure

1. Connect the USB or serial (COM) cable to the correct port on the PC.
2. Connect the USB or serial (COM) cable to the correct port on the diagnostic unit.
3. Connect the adapter to the diagnostic unit.
4. Connect the diagnostic unit to power.
5. Connect the adapter to the heater.
6. Turn the heater on.

Why is my diesel heater not working?

The most likely causes of heaters not starting is no fuel, insufficient power or no air flow. Please follow the steps below to check these issues. Remember to reset the heater between starting attempts by removing and replacing the fuse.

How do you prime a fuel line?

Prime the fuel system by turning the ignition on (Run position) for 30 seconds, but do not start the engine. This allows the pump to prime the system. Turn the ignition off, and then crank it for 15 seconds. If it does not start, repeat the first task and this one until it starts (cycle the key).

Which is better Espar or Webasto?

Conclusion. If you are looking for a more user-friendly heater, an Espar heater is the way to go, as it’s much easier to install and replace parts in the future. Installing Webasto heaters is fairly more difficult and often it will require a professional van converter.

How much diesel does a Webasto heater use?

How much fuel does a Webasto heater need per hour? Of course, the fuel consumption is strongly depending on the needed heating power and type of heater. As very rough and noncommittal proportion a heater needs 100 ml diesel per hour and kW. For further details, please see the heater’s technical specifications.

How do you use the Webasto timer?

Press and hold the button. Press the “Forward” or “Reverse” button as well. The time of the day is displayed and the clock symbol flashes. Set the time via the “Forward” or “Reverse” buttons.