How do I reset my Hunter fan remote?
Press and hold both the ‘FAN’ button and the ‘SPEED 3’ button for at least four seconds. This step should be done within three minutes of restoring power to the fan. Your fan should turn on low speed indicating the pairing was successful.
Do ceiling fans have serial numbers?
The Serial Number is only required if the product is a ceiling fan. The serial number is located on top of the motor housing. It will be a long number usually starting with V.
Do all Hunter light kits fit all Hunter fans?
Hunter Ceiling Fan Light Kits Hunter is one of the few brands whose light kits are only universal to their own fans. Luckily, Hunter offers plenty of light kit styles to choose from so you are sure to match your style and finish.
Can you just replace fan blades?
Most fan blades attach via two screws near the motor and fan housing. Use a screwdriver to remove a single fan blade. Measure the length of the ceiling fan blade you just removed. This will give you the proper size for replacing ceiling fan blades.
Are ceiling fan blades interchangeable?
Replace ceiling fan blades with the same size blades. Universal replacement blades are available at home improvement and lighting stores. You can contact your fan’s manufacturer for replacement blades if you are unable to find the correct replacement sizes.
Why is my Hunter ceiling fan remote not working?
Perhaps the most common cause for a ceiling fan remotes not working is either a lack of batteries or dead batteries. If your remote control has an indicator light, check to see if it comes on. Open the remote control battery cover. Make sure it has batteries and that they’re in the correct position.
How do I resync my ceiling fan remote?
There are several ways to reset a ceiling fan remote, but here’s the most straightforward: With the power off, hold down the button until the light on the remote flashes. Then, press and hold it again for 15-30 seconds to resynchronize the remote with your fan.