How do I reset my Brother laser printer cartridge?

How do I reset my Brother laser printer cartridge?

Reset process

1. Switch-off the printer.
2. Press and hold the on/off button.
3. When all the LEDs turn on, open the cover and remove the toner cartridge + drum unit.
4. Release the on/off button.
5. Re-install the toner cartridge + drum unit back into the printer and close the printer cover.

How do you reset the toner on a Brother MFC 9120CN?

Step 1 – Open the front cover of the Brother MFC-9320/MFC-9120CN/MFC-9010CN. Step 2 – Press the “CLEAR/BACK” button in the printer. Step 3 – Use arrows to select toner in question (“std” or “str” I assume is for “standard” or “starter”). Step 4 – Select option #1 “Reset“.

How do I bypass toner warning on Brother printer?

Open the front cover of the printer and press the CLEAR / BACK button. Press the following buttons on the keypad in this sequence, *, 0 and finally 0. Close the front cover. The warning message should now be clear.

How do I override the replace toner on Brother printer?

1. Power on the Brother printer.
2. Open the toner access door located at the front of the printer.
3. Press the “Clear/Back” button.
4. Scroll through the list of toner cartridges until you have located the one that is giving the “Replace Toner” message.
5. Press the “1” button to reset the toner cartridge display.

Why won’t my Brother printer recognize the ink cartridge?

Check that the machine power is turned ON and install the ink cartridges. If the machine is powered-off, it cannot detect when the ink cartridges are installed. Each colour has its own correct position – match the colour of the cartridges with the colour of the levers. Reinstall the ink cartridges one at a time.

Why won’t my Brother printer recognize the toner cartridge?

Turn off the power and unplug the printer from the outlet and let it sit for 10 or so minutes. Plug it back in and re-insert the cartridge. Turn the power back on and this should work and your new cartridge should work!