How do I register my Grandstream IP phone?

How do I register my Grandstream IP phone?

To register the phone through the phone LCD screen, select [MENU]→[Settings]→[Accounts] →[Account], and enter the required information (similar to the web interface). Note: If the default primary IPVideoTalk account is changed and needs to be restored, please factory restore the unit.

How do I troubleshoot my Grandstream phone?

Navigate to Devices and locate the phone with connectivity problems, then click on the device to bring up the settings. Change the SIP Transport setting to “TCP”, then press Update Details. Power off the phone, wait a few seconds, then power it back on.

Why is my Grandstream phone not receiving calls?

I can make Outgoing calls but I cannot receive any incoming calls? This is most likely due to intermediate device like Router/Firewall blocking UDP ports for SIP. Make sure you’re router or firewall has ports opened for SIP, RTP, etc like 5060, 5004.

What does no LAN cable mean?

If you get an error message that say “No Lan Cable” this means your phone does not have a connection to your network. We can fix this by checking the cable plugged into the phone. This could be in the case that your router is down or you need special network settings to connect to your network.

How do I factory reset my Grandstream gxp2170?

Press the soft key button directly below the YES on the screen to reset the phone back to factory settings.

How do I factory reset my dp752?

Click the Reset button in the Configure WEB UI button section. The device will reset to the factory settings and reboot.

What is direct IP call?

Direct IP calling allowings one VoIP phone to call another VoIP phone by dialling the destination phone’s IP address directly without using a service like sipgate. Unwanted or nuisance Direct IP Calls are called SPIT calls (Spam over Internet Telephony).

How do I use IP call?

Here’s how to make VoIP calls on Android!…Set up a SIP account

1. Tap the More button in the top right corner.
2. Open the Settings menu and enter the Calls section.
3. Select Calling accounts, then SIP accounts.
4. Tap Create (next to the + icon).
5. Enter your username, password, and server ID.
6. Press Save.

How do I set up SIP?

Fund house website: SIP can be set up using i-SIP facility from the fund house website by entering personal details, SIP and bank details. A URN is generated on submission. Now, the investor needs to log in to his bank account and add the mutual fund as a ‘biller’. The URN is needed to enable the SIP instruction.

Is the grandgrandstream dp715/710 a good phone?

Grandstream’s DP715/710 is a reliable inexpensive DECT cordless IP Phone that works with the Callcentric service when placed behind your broadband internet router. You can add up to 5 cordless hansets to the DP715 base unit. These instructions are based on hardware version 1.2A running the 1.0.0.8 firmware.

How do I connect my phone to the dp715?

Now connect your phone to the DP715. Finally plug the supplied power cable into the DP715. Once the device is fully powered up, pick up the phone connected to the DP715 and dial the * key 3 times. Once you hear the menu enter 0 2 on your phone. You will now hear a message giving you the IP address of your DP715. I.E.: 192.168.001.010.

What is the default administrator password for the dp715?

The default administrator password for the DP715 is admin. You should be taken to a splash page showing your device’s registration status, firmware… etc: To do this click on the PROFILE 1 tab and configure the server settings for your Callcentric account.

How do I login to my callcentric account on the dp715?

Enter the password for the DP715 in the password field. The default administrator password for the DP715 is admin. You should be taken to a splash page showing your device’s registration status, firmware… etc: To do this click on the PROFILE 1 tab and configure the server settings for your Callcentric account.