How do I connect my Garmin eTrex Venture HC to my computer?
Connect your GPS to your computer using a GARMIN PC Interface cable to an open USB port. Turn the GPS on. If your computer asks for a driver, please see the software and installation instructions that came with your device, or download and install the USB driver from Garmin’s website at www.garmin.com.
How do I turn on my eTrex Venture HC?
To turn on the eTrex: Press and hold POWER. A tone sounds, and the Introduction page appears, followed by the Satellite page. The GPS receiver begins searching for satellite signals.
How do I reset my Garmin etrex?
Performing a Full Reset
- Power off the eTrex.
- Press and hold both the Page2 and Enter3 buttons simultaneously.
- Power on the device while continuing to hold Page and Enter.
- Release all buttons once the Do you really want to erase all user data? message appears.
- Select Yes.
How do I update my Garmin eTrex?
Open the C:\Garmin (or other folder where you un-zipped the files), locate the file named “Updater” and double click on it. Connect your GPS to your computer using a GARMIN PC Interface cable to an open serial port.
What is a Garmin eTrex?
eTrex devices are the first-ever consumer-grade receivers that can track both GPS and GLONASS satellites simultaneously. When using GLONASS satellites, the time it takes for the receiver to “lock on” to a position is (on average) approximately 20 percent faster than using GPS.
How do I reset my Garmin eTrex Venture HC?
How do I calibrate my Garmin eTrex?
The device has a 3-axis electronic compass (eTrex® 30/30x devices only)….Calibrating the Compass
- Go outside, away from objects that influence magnetic fields, such as cars, buildings, or overhead power lines.
- From the compass, select menu.
- Select Calibrate Compass > Start.
- Follow the on-screen instructions.