Does DeVilbiss still make air compressors?

Does DeVilbiss still make air compressors?

DeVilbiss Air Power Company was founded in 1888 with headquarters in Tennessee. They manufactured air compressors, air tools, pressure washers, generators, and more. Today, the brand is included under MAT Industries LLC. In 1999, DeVilbiss was sold to Pentair, who then sold their company to Black & Decker in 2004.

How do I recondition my air compressor?

Instructions

1. Shut off the electricity and drain the air tank. Unplug the air compressor’s power cord from the wall outlet.
2. Remove the compressor shroud.
3. Disassemble the pump head.
4. Remove the fan.
5. Remove the piston and sleeve.
6. Remove the compression ring.
7. Install the new compression ring.
8. Install the new cylinder sleeve.

What is an OEM compressor?

The Importance of OEM (Original Equipment Manufacturing) Air Compressor Parts. OEM (Original Equipment Manufacturing) parts are critical to the life of your compressor. The peace of mind that you’re using genuine parts specifically designed that meet the specs of the manufacturer is second to none.

Who bought DeVilbiss?

Following the 2010 merger of Stanley Works and Black and Decker, the new Stanley Black & Decker sold DeVilbiss Air Power to MAT Holdings on March 31, 2011.

Do refrigerators and air conditioner have the same parts?

All refrigeration and air-conditioning systems have four basic parts: the compressor, condenser, throttling or expansion valve and the evaporator. The difference is that while the engine generates power, the compressor consumes power and compresses the refrigerant.

Can compressor be repaired?

Can A Broken AC Compressor Be Fixed? Absolutely! If you know what to look for, you may be able to head off the problem with your AC unit before the weather gets too hot.

How much does it cost to replace an air compressor?

The average home air conditioning compressor costs $1,200 to replace with a typical range anywhere from $800 to $2,800. Parts and labor each make up about 50% of the price. You’ll pay $400 to $1,600 for the parts alone. Labor runs $400 to $1,200 with most contractors billing $50 to $150 per hour.

What is the importance of OEM?

An original equipment manufacturer (OEM) provides the components in another company’s product, working closely with the seller of the finished product, known as the value-added reseller (VAR).

What are the parts of A DeVilbiss Air Compressor?

Common Devilbiss air compressor replacement parts 1 Pressure switch. The pressure switch turns the air compressor on and off to regulate the tank air pressure. 2 Regulator. The regulator controls air pressure from the tank to the supply hose. 3 Safety valve. 4 Tank drain valve. 5 Valve plate.

What is the valve plate on a compressor?

This part is used in the all of the compressors models listed below. When air is pumped by the piston it passes through the Valve Plate into the compressor tank. There are reeds on the valve plate that will eventually wear out, and the Valve plate will need to be replace.

When should I replace the valve plate on my compressor?

When air is pumped by the piston it passes through the Valve Plate into the compressor tank. There are reeds on the valve plate that will eventually wear out, and the Valve plate will need to be replace. It is advisable at this time to replace the Graphite Gasket Kit, part number D30139.