Do printer cartridges require SDS?

Do printer cartridges require SDS?

Question 3: Must the ink cartridge label(s) and SDS(s) contain health hazard information related to STOT-RE? Response: Yes. 9, Specific Target Organ Toxicity- Repeated or Prolonged Exposure, the hazard information is required to be on the label and SDS, per 1910.1200(f) and (g).

How do I get an SDS sheet?

To obtain SDS, get them from the manufacturer.

  1. They may be sent with the chemical order (paper copy or e-mail attachment).
  2. Otherwise, go to the manufacturer’s website and download it or request a copy.

Are toner cartridges Hazmat?

Toner products do not contain carbon black in the form of “airborne, unbound particles of respirable size”. Therefore, the requirements of Proposition 65 do not apply to this product. This material, as supplied, is not a hazardous waste according to Federal regulations (40 CFR 261).

Are toner cartridges flammable?

Many chemicals in toner and ink are hazardous. Toner is a fine, densely-packed powder which functions like ink. It consists of plastic particles, carbon black, fumed silica, dyes, and charge control agents. This chemical composition renders it extremely flammable, even explosive under certain conditions.

What products are exempt from SDS?

Exempt: Drugs and Pharmaceuticals

  • in solid, final form for direct administration to the patient (e.g., tablets or pills)
  • drugs which are packaged by the chemical manufacturer for sale to consumers in a retail establishment (e.g., over-the-counter drugs)

Who is SDS not intended for?

SDS’s are not meant for consumers. An SDS reflects the hazards of working with the material in an occupational fashion. For example, an SDS for paint is not highly pertinent to someone who uses a can of paint once a year, but is extremely important to someone who uses that paint 40 hours a week.

Who creates an SDS sheet?

Safety data sheets are created by the manufacturer and/or distributor of the hazardous chemical. SDSs are updated by the chemical manufacturer or distributor within three months of learning of “new or significant information” regarding the chemical’s hazard potential.

Is Whmis a law?

Is WHMIS a law? Yes. WHMIS became law through a series of complementary federal, provincial and territorial legislation that became effective October 31, 1988.

What does SDS stand for Whmis?

safety data sheets
WHMIS 2015 sets out requirements for safety data sheets (SDS) in Part 4 of the Hazardous Products Regulations (HPR).

What type of hazard is inkjet printer cartridge?

Inhalation may result in respiratory irritation. Ingestion may result in nausea, vomiting, and diarrhea. Metal nitrate: Contact with eyes and skin may cause irritation. Inhalation may cause respiratory irritation.

Is it OK to throw away toner cartridges?

Toner cartridges should always be disposed of in an appropriate container or bin and shouldn’t be treated like a regular trash item. If you’re at home, you can put your cartridges in the recycling bin. At the office, find out if a recycling program is already in place.

Is it OK to throw away ink cartridges?

they are hazardous waste and must be managed as such. Partially full or un- recyclable cartridges must be given to the Environmental Health and Safety Office (X-8847) for proper disposal. Hazardous waste must never be disposed as regular trash.

Where can I find MSDS data sheets for HP inkjet cartridges?

Material Safety Data Sheets (MSDS) and Product Safety Information Sheets for HP Inkjet cartridges can be viewed or printed online at HP’s MSDS Web site. Click here to view and print MSDS data sheets on the HP Web site.

What is the ard-863-1 cartridge made of?

The ARD-863-1 Impulse Cartridge is a standardized store ejection and release car- tridge and consists of a cylindrical aluminum alloy case and ignition element (electrode, bridgewire, and ignition charge) and a separa- tion disc. The CCU-44/B Impulse Cartridge NSN-1377-01-033-2622 (MD66) is a suitable sub- stitute for the ARD-863-1 (M189).

What is a squib cartridge made of?

The output end of the cartridge is crimped over a brass slug, Each squib is a self-contained unit con- tained in a thin shell of bronze alloy, 0.272-inch in diameter, and with an integrally-formed con- vex head.

What are the parts of a cartridge?

The cartridge consists of a machined brass casing with a hexagonal midsection and a threaded end enclosing a pair of electrically- fired DuPont E-92 type squibs, placed side by side.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top