Are Seagull outboards still made?

Are Seagull outboards still made?

The British Seagull was a British manufacturer of two-stroke outboard engines in Poole, Dorset from the late 1930s until the mid-1990s. Production of complete engines stopped in 1996, and another company bought the rights to the brand in 1999. Spare parts continue to be produced for existing engines.

How reliable are Seagull outboards?

“Seagull Outboards are tough old birds, but they won’t last forever.” The lifespan of a Seagull Outboard is about 25-40 years, at which point the cylinder-blocks corrode beyond redemption. This is the Seagull’s death cry, as the blocks are running out, although Sheridan Marine still make a good range of other spares.

What horsepower is a seagull engine?

This engine was a twin cylinder 10hp version capable of powering boats up to 30 feet (9.1m). The two men credited with the continued development of the Seagull engine are John Way-Hope, who had worked for Evinrude, and Bill Pinniger, a design engineer.

What fuel does a seagull outboard use?

British Seagull Outboard Technical Tips All British Seagull outboard engines should run on unleaded petrol. Did you know that unleaded petrol does not store for as long as standard leaded petrol – so keep it fresh. As soon as you mix Two Stroke Oil with the petrol it shortens its useful life.

How do you start a seagull engine?

Start the engine by opening the tap at the base of the fuel tank, give the motor a shake from side to side to encourage fuel tank gas to send petrol into the float chamber and then open the breather screw in the middle of the filler cap.

How do British seagulls start?

Why did British Seagull go out of business?

British Seagull was a British manufacturer of two-stroke outboard engines from the early 1930s until the mid-1990s. The company went out of business due to the motor design not being able to keep up with more modern boat engines and increasingly tight emissions regulations.

Where are British Seagull outboards made?

British Seagull outboards were first sold under the name Marston Seagull. They were developed at John Marston Ltd ‘s ” Sunbeamland ” factory in Wolverhampton by development engineers John Way-Hope and Bill Pinninger.

When did the Marston Seagull change its name to British Seagull?

By 1938 they had consolidated the design of the engine and had moved into new premises on the Quay at Poole, Dorset. To celebrate this milestone the name Marston Seagull was changed to British Seagull and the engine was proclaimed as ‘The Best Outboard Motor in the World’ – later changed to ‘The Best Outboard Motor for the World’.

Who invented the Seagull engine?

The two men credited with the continued development of the Seagull engine are John Way-Hope, who had worked for Evinrude, and Bill Pinniger, a design engineer. They met while working in the marine division of the Sunbeam Motor Company.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top